ENGINE - Crankshaft, Rods, Flywheel & Main & Rod Bearing
| Part Number | Description | Price | Add | |
|---|---|---|---|---|
CRK1.0  |
BEARING , ROD BEARING SET STD : STANDARD OUTSIDE JOURNAL DIAMETER 616-103-142-02-SET Fits 356B, C, SC & 912 |
616-103-142-02-SET | $67.50 |  |
| CRK1.1 |
BEARING , ROD BEARING SET -0.25mm : 1st. UNDERSIZE OUTSIDE JOURNAL DIAMETER 616-103-142-52-SET Fits 356B, C, SC & 912 |
616-103-142-52-SET | $60.50 | |
| CRK1.2 |
BEARING , ROD BEARING SET -0.50mm : 2nd. UNDERSIZE OUTSIDE JOURNAL DIAMETER 616-103-142-62-SET Fits 356B, C, SC & 912 |
616-103-142-62-SET | $110.00 | |
| CRK1.3 |
BEARING , ROD BEARING SET -0.75mm : 3rd. UNDERSIZE OUTSIDE JOURNAL DIAMETER 616-103-142-72-SET Fits 356B, C, SC & 912 |
616-103-142-72-SET | $237.50 | |
| CRK1.8 |
CONNECTING ROD , HIGH-PERFORMANCE PAUTER "I" BEAM DESIGN with 5/16" ARP BOLTS , SET of 4 INCLUDES 616-103-012-02-P Fits ALL 356 & 912 |
616-103-012-02-P | $1050.00 | |
| CRK1.9 |
CONNECTING ROD , HIGH-PERFORMANCE CARILLO PRO "H" BEAM DESIGN with CARR-S7 1/4" BOLTS , SET OF 4 ( AKA : 616-103-012-02-C ) NLA-103-012-02 Fits ALL 356 & 912 |
616-103-012-02-C | $1500.00 | |
| CRK3.0 |
HEX NUT , CONNECTING ROD BEARING CAP QUALITY REPRODUCTION , 8 REQUIRED per ENGINE 502-03-114 Fits ALL 356 & 912 |
502-03-114 | $6.00 | |
| CRK3.1 |
HEX NUT , CONNECTING ROD BEARING CAP PORSCHE O.E. PART , 8 REQUIRED per ENGINE 502-03-114-OE Fits ALL 356 & 912 |
502-03-114-OE | $9.00 | |
| CRK4.0 |
BUSHING , WRIST PIN END of CONNECTING ROD 22.0mm ( 21.5mm ) INSIDE DIAMETER QUALITY REPRODUCTION , 4 REQUIRED per ENGINE 616-103-131-01 Fits ALL 356 & 912 |
SIC-103-131-01 | $15.00 | |
| CRK4.1 |
BUSHING , WRIST PIN END of CONNECTING ROD 22.0mm ( 21.5mm ) INSIDE DIAMETER PORSCHE O.E. PART , 4 REQUIRED per ENGINE 616-103-131-01 Fits ALL 356 & 912 |
616-103-131-01-OE | $30.00 | |
| CRK5.0 |
GLAND NUT for FLYWHEEL HIGH-PERFORMANCE , BRONZE BUSHING TYPE INCLUDES SPECIAL HARDENED WASHER 616-102-025-01 Fits ALL 356 & 912 |
NLA-102-025-01 | $60.00 | |
| CRK5.1 |
GLAND NUT for FLYWHEEL HIGH-PERFORMANCE , NEEDLE BEARING TYPE INCLUDES SPECIAL HARDENED WASHER 616-102-025-01 Fits ALL 356 & 912 |
NLA-102-025-02 | $60.00 | |
| CRK5.2 |
GLAND NUT WASHER for FLYWHEEL GLAND NUT HIGH-PERFORMANCE HARDENED WASHER 539-02-103 Fits ALL 356 & 912 |
539-02-103 | $4.75 | |
| CRK6.0 |
FLYWHEEL for 180.0mm CLUTCH DIAMETER GERMAN MANUFACTURE. 502-102-116-00 Fits 356 , 356A , & 356B 1950-1962 |
502-102-116-00 | $850.00 | |
| CRK6.1 |
FLYWHEEL for 180.0mm CLUTCH DIAMETER QUALITY REPRODUCTION. 502-102-116-01 Fits 356 , 356A , & 356B 1950-1962 |
008 180FW | $240.00 | |
| CRK6.3 |
FLYWHEEL for 200.0mm CLUTCH DIAMETER GERMAN MANUFACTURE. 616-102-201-03 Fits 356SC 1963-1965 , 356C 1964-1965 |
616-102-201-03 | $525.00 | |
| CRK6.4 |
FLYWHEEL for 200.0mm CLUTCH DIAMETER QUALITY REPRODUCTION. 616-102-204-04 Fits 356SC 1963-1965 , 356C 1964-1965 |
008 200FW | $240.00 | |
| CRK6.5 |
FLYWHEEL for 200.0mm CLUTCH DIAMETER GERMAN MANUFACTURE 616-102-201-02 Fits 356B S-90 1960-1963 |
616-102-201-02 | $845.00 | |
| CRK6.6 |
FLYWHEEL for 200.0mm CLUTCH DIAMETER QUALITY REPRODUCTION 616-102-201-03 Fits 356B S-90 1960-1963 |
616-102-201-03 | $ | |
| CRK6.8 |
FLYWHEEL for 200.0mm CLUTCH DIAMETER GERMAN MANUFACTURE 616-102-204-01 Fits 912 1965-1969 |
616-102-204-01 | $650.00 | |
| CRK6.9 |
FLYWHEEL for 200.0mm CLUTCH DIAMETER QUALITY REPRODUCTION 616-102-204-01 Fits 912 1965-1969 |
616-102-204-02 | $230.00 | |
| CRK7.0 |
GASKET for FLYWHEEL to CRANKSHAFT END , SOFT METAL MATERIAL SHOULD BE REPLACED EACH TIME THE FLYWHEEL IS DISASSEMBLED . 502-02-301 Fits ALL 356 & 912 1950-1969 |
502-02-301 | $1.15 | |
| CRK8.0 |
FLYWHEEL SPACER WASHER For FLYWHEEL to CRANKSHAFT END POSITION SETTING 0.80mm THICK PORSCHE O.E. PART 369-02-107-1 Fits ALL 356 & 912 Except Super 90. |
369-02-107-1 | $36.00 | |
| CRK8.1 |
FLYWHEEL SPACER WASHER For FLYWHEEL to CRANKSHAFT END POSITION SETTING 0.85mm THICK PORSCHE O.E. PART 369-02-107-2 Fits ALL 356 & 912 Except Super 90. |
369-02-107-2 | $36.00 | |
| CRK8.2 |
FLYWHEEL SPACER WASHER For FLYWHEEL to CRANKSHAFT END POSITION SETTING 0.90mm THICK PORSCHE O.E. PART 369-02-107-3 Fits ALL 356 & 912 Except Super 90. |
369-02-107-3 | $36.00 | |
| CRK8.3 |
FLYWHEEL SPACER WASHER For FLYWHEEL to CRANKSHAFT END POSITION SETTING 0.95mm THICK PORSCHE O.E. PART 369-02-107-4 Fits ALL 356 & 912 Except Super 90. |
369-02-107-4 | $36.00 | |
| CRK8.4 |
FLYWHEEL SPACER WASHER For FLYWHEEL to CRANKSHAFT END POSITION SETTING 1.00mm THICK PORSCHE O.E. PART 369-02-107-5 Fits ALL 356 & 912 Except Super 90. |
369-02-107-5 | $25.00 | |
| CRK8.5 |
FLYWHEEL SPACER WASHER For FLYWHEEL to CRANKSHAFT END POSITION SETTING 1.05mm THICK PORSCHE O.E. PART 369-02-107-6 Fits ALL 356 & 912 Except Super 90. |
369-02-107-6 | $32.50 | |
| CRK8.6 |
FLYWHEEL SPACER WASHER For FLYWHEEL to CRANKSHAFT END POSITION SETTING 1.10mm THICK PORSCHE O.E. PART 369-02-107-7 Fits ALL 356 & 912 Except Super 90. |
369-02-107-7 | $37.50 | |
| CRK9.0 |
DOWELL PIN for FLYWHEEL to CRANKSHAFT POWER TRANSFER 8.0mm DIAMETER , 8 REQUIRED per ENGINE 900-109-004-00 Fits ALL 356 & 912 Except Super 90. |
900-109-004-00 | $5.25 | |
| CRK10.5 |
CRANKSHAFT , FORGED , FACTORY STOCK NON-COUNTER WEIGHTED , GERMAN MANUFACTURE 616-102-013-03 Fits 356C 1964-1965 |
616-102-013-03 | $4277.00 | |
| CRK10.6 |
CRANKSHAFT , HIGH-PERFORMANCE , FORGED BILLET COUNTER WEIGHTED , 74.00mm STROKE , LIGHT WEIGHT at 18.36 lbs. NITRIDED and MICRO-POLISHED JOURNALS 616-102-015-05 Fits 356C , 356SC , & 912 1964-1969 |
8-10912L | $2450.00 | |
| CRK10.7 |
CRANKSHAFT , HIGH-PERFORMANCE , FORGED BILLET COUNTER WEIGHTED , 74.00mm STROKE , 4340 ALLOY STEEL NITRIDED and MICRO-POLISHED JOURNALS 616-102-015-02 Fits 356C , 356SC , & 912 1964-1969 |
008 4001 S74 | $1525.00 | |
CRK10.9 |
CRANKSHAFT BEARING JOURNAL SURFACE REPAIR , SPEEDI REPAIR SLEEVE CRANKSHAFT FLYWHEEL HUB END JOURNAL SURFACE REPAIRS SIC-102-992-41 Fits ALL 356 & 912 1950-1969 |
SIC-102-992-41 | $65.00 | |
| CRK11.0 |
Woodruff Key, Timing Gear 901-102-147-00 All 356 & 912. |
901-102-147-00 | $18.50 | |
| CRK11.1 |
Woodruff Key, Timing Gear 901-102-147-00 AFTERMARKET All 356 & 912. |
111-105-213 | $4.00 | |
| CRK12.0 |
Woodruff Key, Front Pulley N-012-709-1 All 356 & 912. |
N-012-709-1 | $2.15 | |
| CRK12.1 |
Woodruff Key, Front Pulley N-012-709-1 AFTERMARKET All 356 & 912. |
113-105-249 | $2.00 | |
| CRK13.0 |
CRANKSHAFT TIMING STEEL GEAR DRIVES CAMSHAFT 539-02-105 All 356 & 912. |
539-02-105 | $307.00 | |
| CRK13.1 |
CRANKSHAFT TIMING STEEL GEAR DRIVES CAMSHAFT 539-02-105 AFTERMARKET All 356 & 912. |
PCG-102-110-01 | $75.00 | |
| CRK14.0 |
Spacer in front of steel gear 539-102-106-00 All 356 & 912. |
539-102-106-00 | $40.60 | |
| CRK15.0 |
Spring, distributor drive. 539-09-103 All 356 & 912. |
539-09-103 | $4.30 | |
| CRK16.0 |
Distributor Drive Shaft 539-09-101 All 356 & 912. |
539-09-101 | $394.00 | |
| CRK18.0 |
Brass Gear, distributor drive , Quality Reproduction 901-102-115-01 All 356 & 912. |
901-102-115-01 | $104.75 | |
| CRK18.1 |
Brass Gear, distributor drive PORSCHE : 901-102-115-01-OE All 356 & 912. |
901-102-115-01 | $104.75 | |
| CRK19.0 |
CIRCLIP 2.4mm. 901-102-148-00 All 356 & 912. |
901-102-148-00 | $9.15 | |
| CRK19.1 |
CIRCLIP 2.4mm. 111-105-227 All 356 & 912. |
111-105-227 | $4.26 | |
| CRK20.0 |
SLINGER WASHER 616-102-163-01 All 356 & 912. |
616-102-163-01 | $4.42 | |
| CRK21.1 |
Crank pulley, 4 hole. Repro NLA-02-113 Fits 356 & 912. |
NLA-02-113 | $346.25 | |
| CRK21.2 |
Speedi Sleeve, Front Pulley SIC-102-991-89 Fits 356 & 912. Repairs worn or grooved seal surfaces! |
SIC-102-991-89 | $55.10 | |
| CRK23.0 |
Bolt, Crank Pulley. 539-02-112 All 356 & 912. |
539-02-112 | $42.75 | |
| CRK24.0 |
MAIN BEARING SET . 55mm Journal Outside Diameter CRANKSHAFT JOURNAL ADD PART NUMBERS-- |
many | $275.00 | |
| CRK24.1 |
MAIN BEARING SET . 50mm Journal Outside Diameter CRANKSHAFT JOURNAL ADD PART NUMBERS-- |
many | $300.00 | |
| CRK24.3 |
MAIN BEARING SET , STANDARD CRANKSHAFT Journal , +0.75mm I.D. CASE DIAMETER 616-100-138-65 Fits 55mm Crank/STD Case. |
NLA-100-138-65 | $458.35 | |
| CRK24.8 |
MAIN BEARING SET , STANDARD CRANKSHAFT Journal , +0.50mm I.D. CASE DIAMETER 616-100-138-00 |
616-100-130-00 | $917.33 | |
| CRK24.13 |
MAIN BEARING SET , 50.0mm STANDARD CRANKSHAFT Journal , +0.25mm I.D. CASE DIAMETER 616-100-901-50 |
NLA-101-901-50 | $425.00 | |
| CRK24.14 |
MAIN BEARING SET , 50.0mm STANDARD CRANKSHAFT Journal , +0.50mm I.D. CASE DIAMETER 616-100-901-55 |
NLA-101-901-55 | $551.50 | |
| CRK24.15 |
MAIN BEARING SET , 50.0mm STANDARD CRANKSHAFT Journal , 1st. OVERSIDE +0.25mm I.D. CASE DIAMETER 616-100-901-70 |
NLA-101-901-70 | $567.90 | |
| CRK25.0 |
DOWEL PIN , No. 1 MAIN CASE BEARING 539-01-110 Fits 1600 Normal & Super. |
539-01-110 | $9.00 | |
| CRK25.1 |
??DOWEL PIN , No. ?1? MAIN CASE BEARING 616-101-172-00 Fits 356C & SC. |
616-101-172-00 | $15.55 | |
| CRK26.0 |
SET SCREW , No. 4 MAIN CASE BEARING 539-01-115 Fits all 356 & 912. |
539-01-115 | $16.33 | |
| CRK27.0 |
STEEL WASHER , for SET SCREW at No. 4 MAIN CASE BEARING 900-028-024-01 Fits all 356 & 912. |
900-028-024-01 | $0.34 | |
| CRK102.0 |
CRANKSHAFT CARRERA ENGINE TYPE 692/3A , 66.0mm Stroke BILLET 692-102-013-01 |
692-102-013-01 | $2700.00 | |
| CRK102.1 |
CRANKSHAFT CARRERA ENGINE TYPE 692/3A , 66.0mm Stroke HYBRID BILLET 692-102-013-50 |
692-102-013-50 | $3500.00 | |
| CRK102.2 |
CRANKSHAFT CARRERA ENGINE TYPE 587 , 74.0mm Stroke BILLET 587-102-013-00 |
587-102-013-00 | $2600.00 | |
| CRK104.0 |
CLAMPING COMPONENT 6 PIECE SET , PLAIN BEARINGS , CRANKSHAFT CARRERA ENGINE TYPES 999-041-405-00 |
999-041-405-00 | $0.01 | |
| CRK104.1 |
SPLIT CONE , CARRERA XXX-XXX-XXX-XX |
$0.01 | |
|
| CRK105.0 |
SPLIT CONE , CARRERA XXX-XXX-XXX-XXWoodruf Key |
900-118-005-00 | $2.00 | |
| CRK106.0 |
SPLIT CONE , CARRERA XXX-XXX-XXX-XXSpacer 2 required in set |
692-102-215-03 | $15.00 | |
| CRK107.0 |
FLYWHEEL STEEL CARRERA ENGINE TYPE 692 , 200mm O.D. X 25mm DEPTH XXX-XXX-XXX-XX |
VP | $900.00 | |
| CRK107.1 |
FLYWHEEL STEEL CARRERA ENGINE TYPE 587 , 200mm O.D. X 29mm DEPTH XXX-XXX-XXX-XX |
VP | $900.00 | |
| CRK108.0 |
SEAL CIRCULAR , REAR MAIN CRANKSHAFT OIL , 85mm O.D. X 55mm I.D. X 10mm THICK XXX-XXX-XXX-XX |
$0.01 | |
|
| CRK110.1 |
HOLLOW SCREW , FLYWHEEL with BUSHINGS , CARRERA ENGINES Converted to PLAIN BEARINGS 692-102-211-04 |
692-102-211-04 | $0.01 | |
| CRK111.0 |
BUSHING , FLYWHEEL with BUSHINGS , CARRERA ENGINES Converted to PLAIN BEARINGS NLA-102-025-01 |
NLA-102-025-01 | $54.80 | |
| CRK203.0 |
HOLLOW STEEL SCREW , for FLYWHEEL , CARRERA Type 547 ENGINE with ROLLER BEARING CRANKSHAFT 547-02-031 |
547-02-031 | $0.01 | |
| CRK217.0 |
HEX BOLT , PULLY XXX-XXX-XXX-XX |
$0.01 | |
|
| CRK217.1 |
SCREW , for CRANKSHAFT PULLY , CARRERA ENGINE with ROLLER BEARING CRANKSHAFT , with 30° V-Drive 547 02 127 |
547 02 127 | $0.01 | |
| CRK217.2 |
DRIVE PLATE , For 30° V-Drive XXX-XXX-XXX-XX |
$0.01 | |
Prices and availability subject to change without notice.